|
Maintenance of Products
All pinta acoustic's foam products are made with open cell foam. This type of cell structure allows the foam to absorb the sound waves but it also means that it will absorb water, dust, dirt, oil and other liquids, unless there is a surface coating or covering. Normally, very little needs to be done with the products once they are installed. However, here are some basic rules for maintaining your pinta products:
SONEX® Wall Panels and Baffles
- » Do not pressure wash or soak with water or any other liquid to clean.
Surface dust and dirt can be blown off with air dryer.
- » If HPC-coated, lightly wipe clean with damp cloth. Again, do not soak with water or liquid.
FABRITEC Wall Panels
- » Do not pressure wash or soak with water or any other liquid to clean.
- » Surface dust and dirt can be blown off with air dryer.
- » Fabric surface can be spot cleaned with mild detergent and damp cloth.
- » If covered with micro-perforated vinyl, rub lightly with a moistened cloth, sponge, or stiff-bristle brush using a mild soap, detergent or non-abrasive cleaner. It is important to use clean water throughout the process. Dry the material with a soft towel.
CONTOUR® or HARMONI Ceiling Tiles
- » Do not pressure wash or soak with water or any other liquid to clean.
- » Surface dust and dirt can be blown off with air dryer.
- » These products are HPC-coated. Lightly wipe clean with damp cloth. Again, do not soak with water or liquid.
WHITELINE™
- » Do not pressure wash or soak with water or any other liquid to clean.
- » Surface dust and dirt can be blown off with air dryer.
SQUARELINE®
- » Do not pressure wash or soak with water or any other liquid to clean.
- » Surface dust and dirt can be blown off with air dryer.
- » Metal surface can be spot cleaned with damp cloth.
SONEX Curtain Enclosures or Materials
- » Do not pressure wash or soak with water or any other liquid to clean.
- » Surface can be wiped with cloth and mild cleaning solution.
PROSPEC® Barriers, Foams and Composites
- » Barrier is extremely dust and dirt resistant does not need to be cleaned.
- » If HPC-coated, lightly wipe clean with damp cloth. Again, do not soak with water or liquid.
For other surface coatings, contact customer service for instructions.
|
|
|